DIG’s 360° Mister with Memory-Flex Tubing operates at a minimum pressure of 30 PSI to produce micro-sized droplets in a small diameter area when mounted above a plant. Higher incoming pressure results in smaller and finer droplets with finer mist. The 2-GPH mister’s vortex design spins the water flow into a fine mist, useful for plants needing constant moisture or wherever overhead watering is indicated. It is easy to position the mister and direct the water flow by adjusting the memory-flex tubing. The tubing retains the position you set, allowing for complete versatility. Position the mister vertically for overhead coverage.
MODEL | DESCRIPTION |
---|---|
7760F | Mister with Memory-Flex™ Tubing |
Pressure | Misting | Flow rate | diameter |
---|---|---|---|
PSI | Mister base | GPH | 360° |
30 | brown 0.035 | 2.21 | 1.4' |
35 | brown 0.035 | 2.40 | 1.3' |
40 | brown 0.035 | 2.61 | 2.4' |
45 | brown 0.035 | 2.78 | 1.5' |
50 | brown 0.035 | 2.91 | 1.5' |
55 | brown 0.035 | 3.02 | 1.6' |
60 | brown 0.035 | 3.17 | 1.6' |
360° Mister with Memory-Flex Tubing | 2' | 3' | 4' | 5' |
---|---|---|---|---|
Flow rate @ 30 PSI | 2.21 | 2.21 | 2.21 | 2.21 |
Maximum length | 142' | 186' | 224' | 255' |
Flow rate in GPM | 2.62 | 2.28 | 2.06 | 1.88 |
Flow rate in GPH | 156.9 | 137 | 123.8 | 112.7 |
# of 360° Mister with Memory-Flex Tubing | 71 | 62 | 56 | 51 |
Head loss in PSI | 4.9 | 5.0 | 5.0 | 4.8 |
Velocity (f/s) | 2.97 | 2.59 | 2.34 | 2.13 |
12", 1/4" micro tubing head loss in PSI | 0.0 | 0.0 | 0.0 | 0.0 |
Total head loss at the 360° Mister with Memory-Flex Tubing head | 4.9 | 5.0 | 5.0 | 4.8 |
The 360° Mister with Memory-Flex Tubing is available with a full-circle pattern in a flow range of 2.21 to 3.17 GPH at 30 to 60 PSI. The 360° Mister with Memory-Flex Tubing droplet size is very sensitive to pressure with higher incoming pressure results in smaller and finer droplets with finer mist. The 360° Mister with Memory-Flex Tubing is made of a three-part construction including the body, cover and color-coded nozzle, and are supported by a 1/4″ just a memory-flex micro tubing and barb. The 360° Mister with Memory-Flex Tubing can be connected directly to poly tubing.
Use 360° Mister with Memory-Flex Tubing for pots and hanging baskets, around pools and patio areas or where overhead cooling may be needed on any type of planting, including vegetation that requires constant moisture, or for humidifying effect. It can also be used for rooting or for creating proper micro-climate conditions.
For densely planted areas or for maximum cooling effect, place the 360° Mister with Memory-Flex Tubing 3′ to 6′ apart for good coverage. Do not use 360° Mister with Memory-Flex Tubing in windy areas as the small-sized droplets can be easily dispersed in the air, even under low-to-moderate wind conditions, adversely affecting uniformity. One of the main advantages of the 360° Mister with Memory-Flex Tubing is that a relatively large number can operate simultaneously on a 1/2” pipe.