Agriculture

Excel PC Dripline

Providing trouble free operation, long life and optimum plant growth for a sustainable and efficient irrigation system.

Excel™ Dripline’s exceptional characteristic of flow uniformity at a wide range of operating pressures presents many advantages in site preservation and system efficiency, ideal for installation in oddly or narrowly shaped areas, parking lots, high traffic areas,green walls, green roofs and windy sites and difficult terrain such as on slopes.

Features

  • Can be installed above or below grade
  • Two flow rates to provide maximum flexibility in a variety of applications
  • Flow regulated, self flushing in-line drip emitters deliver equal flow at a wide range of operating pressures
  • see more
  • Flow uniformity regardless of operating pressure and variation along the line
  • The drip emitter and the diaphragm are self-contained units that are molded into the interior wall of the tubing
  • Turbulent flow through a large labyrinth water passage helps reduce clogging
  • Each emitter is made of three individual sections including a cylindrical plastic housing with labyrinth water passage, a plastic receptacle and floating silicon diaphragm
  • Resistant to chemicals and fertilizers commonly used in landscaping
  • Flexible tubing for easy installation
  • The dripline is marked with flow rate,size and date for easy identification
  • Use with DIG 17 mm barb fittings .670 OD compression fittings and universal Nut Lock™

technical


Excel PC Dripline
how to specify
Model Description
17 MM PC dripline : 670 OD
A5-1XXP 100 ft. 0.58 GPH
A1-1XXP 100 ft. 0.95 GPH
A5-5XXP 500 ft. 0.58 GPH
A1-5XXP 500 ft. 0.95 GPH
A5-XXP 1,000 ft. 0.58 GPH Brown
A1-XXP 1.000 ft. 0.95 GPH Brown

Specifications

  • Flow rates:
    • .58 GPH (2.2 L/H) color code - yellow
    • .95 GPH (3.6 L/H) color code - white
  • Operating pressure: 12-50 PSI (.8-3.5 BAR)
  • Color code: black or brown
  • Materials: Low-density polyethylene resin
  • Sizes:
    • .570 ID x .670 OD (14.5 mm ID x 17 mm OD)
  • Spacing: 12”, 18”, 24”, 30 and 36” (30.5 cm, 45.7 cm, 61 cm 76 cm and 91 cm)
  • Lengths: 100’, 250’, 500’ and 1000’ coils
  • (30 m, 75 m, 150 m and 300 m)
  • Minimum bending radius: 1’ (.3 m)
  • Filter requirement: minimum of 150 mesh




catalogs


Cut Sheets

  • Thumb_41-021_revc-excel3-cut-sheet-102114-w
    English
    01/15/2015

    EXCEL CV Series Dripline



DIG_logo_white_web
Corporate Information

Where To Buy
About
Contact Us
Careers

Irrigation-Association-logo American-Society-of-irrigation-consultants-Logo American-Society-of-Landscape-Architects-Logo Recycling-logo

DIG Corporation
1210 Activity Drive
Vista, CA 92081 USA

Tel: (760) 727-0914
Fax: (760) 727-0282
Toll Free: (800) 322-9146


© copyright 2017 DIG Corporation water matters™ | All rights reserved